22-Inch Wide Seat Electric Wheelchair

This model has a 22.05 in usable seat width and a rated load capacity of 400 lb. Measure your seated hip width and check transfer space and control reach before ordering.

Folding does not make this a travel-light chair. Measure the cargo opening and plan a suitable ramp, vehicle lift or two capable helpers.

Secure the folded chair for travel and lift only from the load-bearing frame—never the controller, armrests or foot supports. Do not plan around frequent solo lifting.

This configuration is listed for up to 20 miles under suitable conditions. Actual distance changes with rider and load, route surface, slope, temperature, battery condition and driving behavior.

Plan a margin: choose an outward route that leaves enough charge to return home. Do not treat the rated maximum as a guaranteed trip distance.

Plan a dry indoor parking area for YS16-1 MAX 20Ah with a clear approach, enough turning space and an appropriate outlet. Keep the route free of cords, rugs and other trip hazards.

Use the supplied or specified charger and follow the owner’s manual. Keep the charger uncovered, away from heat and moisture, and inspect the plug and cable before use.

Sit naturally with feet flat and measure straight across the widest outside points of the hips or thighs while wearing normal clothing.

Compare that result with the chair’s clear seat opening and leave practical comfort room. The image is a general planning guide; individual fit needs vary.

Confirm the current maximum overall width with support before ordering, then measure the narrowest clear doorway and allow clearance for hands, hinges and controls.

Allow extra room for hands and the controller. A labeled door size is not the clear opening, and matching the chair width exactly leaves no maneuvering margin.

Before ordering YS16-1 MAX 20Ah, confirm seated reach to the joystick, the hand you will use, room to turn, and how you will transfer in and out.

If reach, balance or control is uncertain: arrange a hands-on assessment or trained help. Never use the joystick or controller housing as a transfer handhold.

The marked views show the inner clear seat opening, the outer armrest envelope and the widest rear-wheel envelope on the chair itself.

Use the exact listed dimensions as a planning guide, then measure the rider and the narrowest usable opening on the real route before ordering.

YS16-1 MAX is a wide, heavy-duty chair, so route clearance and stopping space matter. Plan around dry, firm, continuous hard surfaces with enough width to turn and stop. Check curb cuts, thresholds, slope, weather and the return route before leaving.

Avoid stairs, loose gravel, deep grass, mud, standing water and steep or unverified grades. Use the owner’s manual and support guidance for operating limits.

Do not assume YS16-1 MAX 20Ah will be accepted on every flight. Contact the airline before booking with the chair’s dimensions and weight, battery type and rating, whether the battery is removable or protected, and the handling instructions.

Carrier and aircraft restrictions vary. Follow the airline’s current forms and instructions and allow extra check-in time.

Keep the carton and packing materials. Before riding, compare the chair and included items with the packing list, check for transit damage, and follow the owner’s manual for unfolding, charging and first-use checks.

If anything is missing, damaged or unclear, photograph the condition and contact Anywell support before outdoor use or self-repair.

Review the current manual, then test release-to-neutral stopping at low speed on level ground before daily use.

Do not guess stopping distance or depend on an unverified stop on a slope. Contact support if the behavior is unclear.

The comparison shows the same 20Ah wheelchair with the battery installed at the rear center and with the battery removed and displayed separately below the chair.

This identifies location and state only. Always follow the owner’s manual before handling the battery.

Place YS16-1 MAX 20Ah on a level surface, disconnect the charger, release the joystick to neutral and confirm the manual/freewheel controls are in the drive position described in the owner’s manual.

Do not force a lever or ride while the setup is uncertain. If the chair still will not move, record what you checked and contact Anywell support.

Check the outlet, connector, charger indicator and the charging steps for YS16-1 MAX 20Ah in the owner’s manual. A full charge, temperature, route, load and battery condition can all affect usable distance.

Stop using the battery or charger if it is hot, swollen, wet, damaged or has an unusual smell. Photograph the indicator and condition, contact support, and do not open the battery or charger.

Stop YS16-1 MAX 20Ah on a level dry surface, release the joystick to neutral and power off. Check only visible tire condition, obstructions and loose external cables, then restart once as directed by the owner’s manual.

Record the light or beep pattern and contact support if the alert or pulling continues. Do not open or self-repair the controller or electronics.